How To Connect With Mikrotik

Required:

1. Active MikroTik subscription.
2. Active MyWiFi subscription.
3. A location with an associated campaign.

MikroTik setup

The configuration can be applied on MikroTik RouterBOARD devices with default settings — as an out-of-the-box unit, or after a factory reset has been performed.

If the MikroTik device has a custom setup, this guide assumes that the MikroTik device is already configured to fit these parameters:

1. There is a DHCP client (or IP address, gateway, and DNS IP addresses) on WAN interface.
2. There is a NAT (masquerade) on WAN interface.
3. There is an IP address and DHCP server on the interface that will be used as the hotspot.
4. There is no hotspot configuration on the device already.